Skip to content

I bought a couple of Winsor & Newton brushes once, they cost me about five pounds each and I ruined them in about a week.

Oil painters don’t need expensive brushes, watercolour painters yes, it definitely helps, but oil painters, no – That said, an oil painter does need clean brushes.

If you use a dirty brush to mix your oil paint colours and tones, then when you dip your brush into the different pigments and mix them together on a separate area of your palette, the dirty paint will come down out of the ferrel and spoil your colours. The best way to mix colours and keep them clean and fresh is to use a palette knife to mix up your paints, and then apply the paint with your brush. Even if you do this, if you apply the paint with a dirty brush you still get plenty of muddy paint and thinners leaching out of the bristles and ferrel if your brushes are not clean.

To combat this, a lot of artists will use a clean ( different ) brush for each colour that they are using, which obviously requires using a lot of brushes. Some artists instead use a DARK brush and a LIGHT brush, just keeping the lighter tones and the darker tones separated between two different brushes.

I personally own at least 2 million brushes, I’m exaggerating of course.. it’s more like 1 million, but I only really use 2 or 3 brushes for any particular painting, and I can do that because I clean my brushes well as I paint.

 

So what’s the best way to clean your brushes?

  1. A jam jar full of turps is okay, but every time you swish your brush about you’ll stir up all the muddy mess at the bottom.
  2. 2 jam jars is better, one for the initial clean and a second one to clean off the stirred-up mess from the first wash, but a few brush washes later the second jar will be as bad as the first.
  3. Soap and hot water. This is great for getting a really good clean post-painting, but impractical when you’re sitting at your easel and in mid painting flow.
  4. A purpose built suspended sieve brush washer – read on:

 

artists steel paint brush cleaner

Stainless steel artist’s brush washer. The deep sieve sits inside the main tub, allowing the paint to settle-out of the turps and remain undisturbed in the bottom of the tub when you next wash your brushes. When you agitate your brush on the bottom of the sieve it doesn’t stir up any paint residue, because the residue is below the sieve level – Image courtesy SAA.

 

different size brush cleaners available

There are various size brush washers available, like these from Holbein and available at Dick Blick art supplies.

 

new Daler Rowney brush cleaner

This Daler Rowney version is very similar to my own brush washer.

 

art supplies paint brush cleaner

When you’ve used your brush washer a little it looks more like this. Now and again I give it a proper clean, but it’s not necessary very often.

 

stainless steel paint brush cleaner

The lid has a sealing rubber ring and seals very tightly, so that once clipped on you can easily transport the brush washer without any spillage.

 

Where can you get one?

The brush washers above are very popular with artists, and readily available online. Try searching ‘Metal Brush Washers’ on google, or just check out the following links:

  1. Ebay – I bought my own brush washer online at Ebay.
  2. Society For All Artists (SAA) – A trusted supplier of art materials, although not always the cheapest.
  3. Amazon – They sell a Daler Rowney brush washer.
  4. www.jacksonsart.com – A big supplier of art materials, they sell a very similar design to the others.
  5. Pullingers – Their brush washer uses the same principle, but are a different design, and because of that are a little cheaper.
  6. DickBlick – This is an American art supplies website, so the prices are in U.S Dollars, but they have a variety of different size brush washer available.

Metal brush washers can to be used with turps (turpentine), white spirit, water ..e.t.c, so can be used by all artists for all mediums.

You can see my own brush washer in use and see how I set up my studio and painting table here.

Happy painting!

Chris

I look forward to some great comments below, and if you enjoyed this post and found it useful, please share it.

8 thoughts on “Stainless Steel Brush Washer – Why It’s The Best Brush Cleaner You Can Get”

  1. Hello,
    Thank you for a nice guide.
    But, have you used with a dark oil paint on brush and after soaking and drying the brush then painted with white paint to see if the white paint is contaminated ? I find that there are fine particles of paint (irrespective of paint manufac., inc. Harding etc) are still in the liquid as shown in your Image?
    Gerry

    1. Hi Gerry, yes that is going to happen, the only way to avoid dark/light contamination is to use a different clean brush for your lights. Try using, at least, one brush for your darks, and a different brush for your lights ~ Chris

  2. Hi Chris, thank you for another v useful blog. At the moment I just use a plastic jug of water to swizzle my brushes in, however I’m always amazed at the amount of sludge at the bottom when I rinse it at the end of a painting session.
    I am now thinking of getting one of these brush cleaners, but also had similar concerns to the previous commenter re the wearing down of my brushes. I suppose it’s a bit of a balancing act between the efficiency of the cleaner and the wear and tear on the brushes.

    1. Hi Tania, I’m glad you found my post useful. It doesn’t matter which medium we use it’s amazing how much sludge settles at the bottom of a jar when we clean our brushes isn’t it. I assume you paint in watercolours or acrylics as you mention water, I think this type of metal brush washer would be fine for you if you don’t push the brushes down into the bottom forcefully. It would still clean your brushes and keep the dreaded sludge separate below. Chris

  3. I have these jas jars but the sieve surface around the holes seems sharp. I am worried that might damage the hair on the brushes if I try and clean them by rubbing on it. I wonder if I should hammer them flat?

    1. Hi Sarmed, If you paint with oils and use hog bristle brushes they should be robust enough to not be damaged, I’ve used my brush cleaner for 10 years with no trouble. If you use acrylic brushes however, which are much softer, this could be a problem perhaps. I’m not sure of a solution, other than to clean acrylic brushes a little less vigorously. Chris

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Stainless Steel Brush Washer – Why It’s The Best Brush Cleaner You Can Get